Back

27 Products

Narrowed By: Fireye
Clear All
YP100 | Keypad selectable parameters, non-recycle operation, modulation, open/closed damper proving, 4 second FFRT

BLV512 | Keypad/Display, 2 line X 16 characters, VACUUM FLUORESCENT DISPLAY (VFD), with cable. Operates -40F (-40C) to 140F (+60C).

60-2812-1 | Closed base with terminal block and knockouts, 4"W x 7"H. UL Recognized.

YP200 | Keypad selectable parameters, recycle operation, modulation, 4 second FFRT

YB110UV | Chassis, 120 VAC, 50/60 Hz with UV non self-check amplifier. UL, FM, CE Approved.

UV90L-1 | UV scanner, Front and side (90o) lateral view, terminal block hook-up

UV7A4 | 1/2" NPT straight UV scanner, 6 ft flex conduit with insulated nylon coupling.

MEP100 | Programmer, Relight function, 10 sec PTFI.

M4RT1 | Integrated flame rectification comtrol, 120 VAC, 50 / 60 Hz, 5 sec purge, 10 sec PTFI, recycle operation. Can be used with UV90L-2 UV scanner, .

FS-2 | Flame simulator of all models of the InSight and Phoenix flame scanners.

ED580-4 | ED510 remote display cable with RJ45 connector - 4 feet.

ED580-2 | ED510 remote display cable with RJ45 connector - 2 feet.

EB700 | Replacement chassis for E100/E110

BP110UV-S3 | BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 3 timings, with UV non-self check amplifier, IP40. Compatible with 60-2981-1 and Siemens LFL wiring base

BP110UVFR-S3 | BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 3 timings, with UV non-self check and FR amplifier, IP40. Compatible with 60-2981-1 and Siemens LFL wiring base

95DSS3-1WINC | InSight II Flame Scanner - Dual detector (IR and UV) with single quick disconnect to connect to InSight I cable connector (e.g., 129-164). NEMA 4X, FM, UL/c, CE Approved. Requires 95DISP-1 or 95WIDISP-2.

95DISP-1 | Vacuum Fluorescent Display (VFD) for InSight II flame scanner.

92-48 | Quartz window used in 60-1199, 60-1199-1, -2 sealing coupling.

60-2814-1 | Open base with terminal block. 4"W x 7"H UL Recognized.

60-1466-2 | Open wiring base for cabinet mtg., use with D Series and FLAME-MONITOR.

53-121 | 2 through 10 orifice set for scanners.

48PT2-1007 | Infrared scanner, 4', straight head, BurnerLogix, E-Series, MicroM

45UV5-1009 | UV self-check scanner, 1" NPT, 102 - 264 VAC shutter. Use with 72DUVS4, 72DUVS1T, BurnerLogix, E-Series, MicroM, FlameWorx II.

35-69 | Heat insulator, 1/2" NPT connector for 48PT, UV1A.